Ss Linc
Articles
-
How do pre-orders work?
Usually for new models that we are bringing in for the first time, we'll do a presale event where we notify those of you who signed up using the "back in stock" notification tool via email and anno...
-
I bought my product from MoreBeer.com or Keg Outlet - Will Ss Brewing give me warranty support?
If you bought your Ss Brewtech product(s) from MoreBeer or Kegoutlet then please contact their customer support directly for warranty or other needs. They do their own support for their own sales....
-
Cold crashing in a Brew Bucket- Should I worry about vacuum/ negative pressure ?
Here is an excerpt of a support ticket with a customer (Ben) about this.... Your logic is not flawed. However, there's really little reason to have positive pressure on the Bucket. If you leave y...
-
What bit should I use to drill 17 mm holes into my Chronical???
Some of you more enterprising/handy folks out there in Brewland want to put your FTSs coil(s) on the side (inside) of your fermenter body instead of the FTSs flat lid (so that you can maintain the ...
-
Hysteresis default setting = 1
The default hysteresis setting should be 1. Here is some recent back and forth on a support ticket about hysteresis setting: Julio, Hysteresis is the difference in which the thermostat turns on an...
-
Can I adjust the FTSs controller to display tenths instead of full 1 degree increments?
Sure can! It is in the advanced settings menu. HERE:
-
Can I crash cool using only ice water and not glycol?
Below is an excerpt from a reply to a customer who asked the above question: We have done a fair amount of testing with the FTSs system. All of the testing was done with Water in the range of the...
-
When using the chiller coil extensions, I am having issues!
Whenever you use the chiller coil extensions (whether that is for partial batches or for heating), you'll want to be sure to put the FTSs temp probe (the black wire) inside the THERMOWELL ON FRONT ...
-
My 3/8" vinyl tubing bends easily, is there anything I can do about that?
Apart from using zip ties and tying your lines together in such a way to reduce pressure and tendency to bend over the barbs on the coil(s), there is another thing we've seen in some customers do w...
-
When in heating mode, my temp is overshooting (high)
The reason your temp overshoots the setpoint is due to the thermal storage in the coil. Basically what happens, is the hot water heats the tube and that in turn heats the surrounding beer. All of t...