Ss Linc
Articles
-
DO NOT USE BLEACH OR CHLORINATED CHEMICALS!
DO NOT USE BLEACH OR CHLORINATED CHEMICALS! Please follow the instructions in the box. If you use bleach, then please don't ask us for warranty exchange unit. We know what bleach damage looks like!...
-
DO NOT USE BLEACH OR CHLORINATED CHEMICALS!
DO NOT USE BLEACH OR CHLORINATED CHEMICALS! Please follow the instructions in the box. If you use bleach, then please don't ask us for warranty exchange unit. We know what bleach damage looks like!...
-
Can I do a 5 Gal sized mash in a 20 gallon Mash Tun?
5 gallon batches are possible with the 20-gallon mash tun, however, expect to lose a bit more heat as a result of the larger head space. The most important thing to compensate for a large amount...
-
Cold crashing in a Brew Bucket- Should I worry about vacuum/ negative pressure ?
Here is an excerpt of a support ticket with a customer (Ben) about this.... Your logic is not flawed. However, there's really little reason to have positive pressure on the Bucket. If you leave y...
-
I have recurring infection brewing in my Chronical!
Here is an excerpt from a recent support ticket we did... Most likely is a ball valve cleaning/sanitation problem if you have a recurring infection(s) happening: Have you completely disassembled ...
-
How do I install the blow-off barb for a FTSs / Bucket lid?
There are two O-rings included with the assembly. One you use with installation and the other as a spare. The one O-ring you'll use for installation goes on the top side of the lid between the ba...
-
Where do the gallon markings begin on my Chronical?
7 Gallon Chronical : 4 gallons 14 Gallon Chronical: 8 gallons 1/2 BBL Chronical: 9 gallons 1 BBL Chronical: 12 gallons
-
How do I install a re-circulation port on the 10 Gal Mash Tun?
*These are included on every current model (2020 and newer) mash tuns.* If you have a legacy 10 gal Mash Tun (2016) with a threaded ball valve, you can add a recirculation port with the parts bel...
-
What size kettle should I buy for various batch sizes?
5 gal batches: 10 gal kettle 10 gal batches: 15-20 gal kettle (depends on preference / a few variables) 1/2 BBL batches: 30 gal kettle The general rule of thumb is you would want to be just under...
-
Can the pump be submersed in glycol solution ?
Yes. You can make a diy glycol setup or go with our chiller.