Ss Linc
Articles
-
How much beer left after racking from the Chronicals or Unitanks Series?
How much beer roughly will be left over after I rack out from my Chronical to another vessel (keg, secondary, barrel, whatever...) 7 gal = 1.3 qts 14 gal = 0.8 qts 1/2 bbl = 0.9 qts
-
Optimal temp for glycol / water solution should be what?
If you are using a glycol solution for cooling in your FTSs system, shoot for 28 - 32 F range for best results.
-
Using a thermoelectric ice chest to make your ice last longer....
There are now loads of coolers on the market designed for summer road trips that typically plug into 12V (car) but often have available AC adapters. These are great if you are using an ice chest ...
-
How are the gallon markings done? What kind of etching?
Gallon markings (and our logo) are done via an electrolytic acid etching process. There seems to be some misconception on a few forums/posts that these are somehow "painted" inside the fermenters a...
-
What is the flow rate of the submersible pump?
The pump flows at 10L per minute. Pretty aggressive for this application, but we wanted to err on the side of more flow versus less. This is a very high-quality pump that will last a long long tim...
-
What's the benefit of having a trub dam in the brew kettle?
The trub dam on our pick up tube is really quite effective! Of course, after your boil, you'll want to set up a whirlpool to get a nice "cone" shape to your trub in the bottom of the kettle. Our ...
-
What is the displacement of the immersion chiller coil?
Roughly a pint. In other words: not very significant. Some of you had asked if immersion coil will displace a lot of volume in the fermenter, and the answer really is no.
-
What is benefit or point of conical bottom on Bucket if you can't dump the yeast?
That is simple - it is about brewing and racking off cleaner beer. One thing the conical base does is greatly reduce the contact patch/area of the trub pile with your beer during ferment. When it ...
-
Should I consider a 15 gal kettle even if I mainly do 5 gal batches?
From: Ssupport Michael <ssbtsupport@icloud.com>Date: Thursday, November 19, 2015 at 10:01 AMTo: Ss Brewtech <support@ssbrewtech.com>Cc: XXXXXXXXXSubject: Re: MICHAEL: [Ss BREWING TECHNOLOGIES] Co...
-
Are the 1/2" ball valves for the kettle and mash tun the same?
Unfortunately, they are not. Please don't get them mixed up in your brewery operations. The kettle valve has a recess/groove on it to accommodate a sealing O-ring. The mash tun valve does not hav...