Ss Linc
Articles
-
SVBS | Immersion Chiller Setup and Use
The SVBS | Immersion Chiller is an optional accessory for SVBS brewers. The Immersion chiller paired with some ½” ID tubing can be attached to most water sources including a typical garden hose via...
-
Accounting for Hotside Loss
The SVBS is designed to be a small footprint and easy-to-use “all-in-one” brewing system. A major component of this concept was building it with an integrated pump and manifold system that eliminat...
-
Calibrate TC Thermometer
The flat head bolt located on the back will turn a little gear inside that moves the back face of the thermometer. Moving the back face of the thermometer will allow you to calibrate. Set up your w...
-
How to Upgrade FTSs Touch Software
Occasionally we release updates to our FTSs Touch Software to add new features, make improvements, and squash any bugs that may pop up. The upgrade process is relatively simple and easy to do! It...
-
Can I Use The Keg WaSsher To Clean And Sanitize A Carboy?
Our Keg WaSsher was designed specifically for cleaning cornelius kegs that are commonly used by homebrewers. While it may be possible to adapt the Keg WaSsher to clean a carboy, it is not something...
-
Carbonation and Oxygenation Stone Wetting Pressures
Our carbonation and Inline Oxygenation Kit stones feature 0.5micron pores and they have a "wetting pressure". A "wetting pressure" is the minimum amount of pressure required to push gas through the...
-
Brite Tank Pressure Rating
We design all of our products with safety as an overarching concern, which is why our line of Brite Tanks are tested to 4 times the recommended operating pressure of 15 PSI. Once the fabrication of...
-
Unitank Pressure Rating
We design all of our products with safety as an overarching concern, which is why our line of Unitank fermenters are tested to 4 times the recommended operating pressure of 15 PSI. Once the fabrica...
-
Ss Unitank vs. The Others - Comparison Table
Please click the PDF link here! OUR UNITANKS VS. THE OTHERS Looking at this very detailed table, comparing our 14 Gal Unitank against other conicals on the market, it illustrates what we've always...
-
How to purge a Brite Tank before filling?
Here are some basic guidelines to follow to purge your Brite tank (or similar vessel) with CO2 before you fill it. First, your Brite Tank should already be cleaned and sanitized at this point, if y...