Ss Linc
Articles
-
We recommend you use a blow off tube for at least the first few days of your primary fermentation
Just like with any fermenter (plastic bucket, glass carboy, plastic carboy, etc) if you are making a big beer and you are relying solely on a small airlock "bubbler" right out of the gate even in t...
-
What is the maximum amount of beer I can transfer into the Brew Bucket and ferment?
The total capacity of the vessel is just a hair shy of 7 gals. The answer to this one really depends on whether you are making an aggressive/high gravity big beer or a more mild-mannered beer. Th...
-
Serviceability of the SVBS
The SVBS is designed around the concept of being an easy-to-use “all-in-one” brewing system with a small footprint. While other brew systems may need to be disassembled after every brew to be thoro...
-
CIP Example Build Guide
In this article, we will cover the basics of building your CIP setup with our CIP | 3" TC | Spray Ball for your Unitank, Brite Tank, and Chronical series fermenter! This will just cover the hardwar...
-
How do I prevent sanitizer from getting sucked back into my Chronical during cold crashing?
There are a few ways to prevent sanitizer from getting drawn back through the blow off tube from liquid contraction during crash cooling. Users with a pressurized transfer setup and a high-resoluti...
-
Properly Disassembling the Sight Glass Ball Valve
To avoid chipping the glass during disassembly of the BME kettle's sight glass back valve, begin by loosening, but not fully removing all 4 bolts holding the valve together. In one hand, hold the...
-
My Brew Bucket's Ball Valve is leaking and the inner O-ring is not sealing, what am I doing wrong?
Actually, the inner O-ring is not required. It's an extra O-ring we include which helps to keep the valve's lock nut from loosening from the inside if the user were to rotate the valve counter clo...
-
How Do I Setup a Whirlpool on a BME Kettle?
We have designed the BME kettle to accept modular TC fittings to divert the flow of wort and create a uniform whirlpool and trub cone. Equipment configurations can vary, so we will offer two examp...
-
Brewmaster Kettle Quick Reference Ref Guide
Please click the attached file here for the Quick Ref Guide.
-
Will I scorch my wort without a Triclad Bottom?
For those concerned about the lack of tri-clad bottom, we designed the new BME kettle so that the outer skirt/firebox would uniformly spread and channel heat through the vents. The skirt is designe...