Ss Linc
Articles
-
Dial Thermometer Threaded Bulkhead Installation
Please see attached document below to see how to attach a dial thermometer.
-
First Generation "FTSs + Heating" Quick Reference Guide
Please see attached document below.
-
How to purge a Brite Tank before filling?
Here are some basic guidelines to follow to purge your Brite tank (or similar vessel) with CO2 before you fill it. First, your Brite Tank should already be cleaned and sanitized at this point, if y...
-
Can I move my Ss Brewtech gear by the handles when full?
No. Ss Brewtech does not recommend lifting full or partially full tanks. Tank handles should only be used to move tanks between batches. Instead of moving full Ss fermenters or Brite Tanks for gr...
-
Can I Use The Keg WaSsher To Clean And Sanitize A Carboy?
Our Keg WaSsher was designed specifically for cleaning cornelius kegs that are commonly used by homebrewers. While it may be possible to adapt the Keg WaSsher to clean a carboy, it is not something...
-
Carbonation and Oxygenation Stone Wetting Pressures
Our carbonation and Inline Oxygenation Kit stones feature 0.5micron pores and they have a "wetting pressure". A "wetting pressure" is the minimum amount of pressure required to push gas through the...
-
Is there risk of oxygen contamination after dumping the trub and/or dry hopping?
Typically, when you do anything to disrupt the beer, such as pulling trub, you will cause some of the dissolved CO2 to escape. While the beer is still actively fermenting during the primary and sec...
-
FTSs and FTSs2 Controller Troubleshooting
If you are having issues with your FTSs or FTSs2 Controller, these troubleshooting steps may be able to help you get sorted out or at least will help identify where the issue is before you reach ou...
-
How much beer left after racking from the Chronicals or Unitanks Series?
How much beer roughly will be left over after I rack out from my Chronical to another vessel (keg, secondary, barrel, whatever...) 7 gal = 1.3 qts 14 gal = 0.8 qts 1/2 bbl = 0.9 qts
-
Can I use the pressurized transfer fitting for blow-off during fermentation?
While it is possible to run a 3/8" line off of our pressurized transfer fitting for use as a blow-off hose, we do not recommend it. The diameter of the outlet tubing on that fitting is narrower tha...