Ss Linc
Articles
-
What are the exact dimensions of the 14 gallon Chronical
36" height x 15.75" width (at widest point). Height is measured from bottom of the legs to the top of the 1.5" TC on the top of the lid. Height does NOT include the adjustable feet that come w...
-
Trying to push or transfer beer to keg or secondary higher than your Chronical?
Here is a snippet from our Support/product folks back to a customer that was trying rack off his beer (under pressure) to a secondary that was sitting significantly higher/ above his primary fermen...
-
Gasket on my Chronical lid doesn't seem to fit right?
It is actually "just right"! Please click below for our link. https://ssbrewtech.zendesk.com/hc/en-us/articles/202237299-The-gasket-for-my-Brew-Bucket-or-Chronical-seems-like-it-is-too-big-for-t...
-
Fruit adjuncts in Brew Bucket or Chronical
One simple way to suspend fruit in any container is to place it into a hop bag (nylon type) To make the bag float, cut a small section of PVC pipe, and glue two end caps onto it and then throw it i...
-
My beer has a slight metallic taste - is that from the metal?
Some of you that used to ferment in plastic or glass run into a batch that has a "metallic" or "tinny" flavor to it and sometimes ask us "is it the metal that makes that flavor?" No - this is most...
-
My bubbler isn't bubbling, but i can still smell fermentation happening!
You probably have a leak either along the lid gasket or the stopper where it plugs into the lid. Those are really the only two paths for CO2 to vent out of the fermenter. Just like you can test a...
-
Extra o-rings (orings) with my unit?
Typically you'll find 1-2 extra o rings on the weldless fittings/parts that we sell (depending on the model) Some people get confused and think the extra o-ring(s) are supposed to go somewhere. Ple...
-
What is best way to transfer wort over to my Chronical from my brew kettle?
Here is a copy/paste from a recent support ticket we did: You'll want to run it through a pump. This is the same setup we use actually. We run the kettle to the pump to the thermonator to the fer...
-
Detail needed on TC flanges and bores used on your Chronical fermenters
Here is an excerpt of email dialogue on a ticket we closed out recently: From: Ss FAQs <FAQ@SsBrewTech.com>Date: Wednesday, March 18, 2015 at 3:23 PMTo: Ss Brewtech <info@ssbrewtech.com>, Zane Su...
-
How do I avoid sucking in sanitizer from airlock or blow off when racking or transferring?
Well one way, of course, would just to do a pressurized transfer (using C02) - we have FAQ's on how to do that and the gear you'd need (also in this FAQ section of the site) Opening a valve on your...