Ss Linc
Articles
-
What size kettle should I buy for various batch sizes?
5 gal batches: 10 gal kettle 10 gal batches: 15-20 gal kettle (depends on preference / a few variables) 1/2 BBL batches: 30 gal kettle The general rule of thumb is you would want to be just under...
-
Can the pump be submersed in glycol solution ?
Yes. You can make a diy glycol setup or go with our chiller.
-
Anti-microbial treatment for FTSs chill source water ???
In general, we haven’t found a need to add anything to the water for a couple of reasons 1) we normally have the system in use for 10 days or less during the fermentation cycle and 2) the water is ...
-
Fruit adjuncts in Brew Bucket or Chronical
One simple way to suspend fruit in any container is to place it into a hop bag (nylon type) To make the bag float, cut a small section of PVC pipe, and glue two end caps onto it and then throw it i...
-
Gasket on my Chronical lid doesn't seem to fit right?
It is actually "just right"! Please click below for our link. https://ssbrewtech.zendesk.com/hc/en-us/articles/202237299-The-gasket-for-my-Brew-Bucket-or-Chronical-seems-like-it-is-too-big-for-t...
-
Optimal temp for glycol / water solution should be what?
If you are using a glycol solution for cooling in your FTSs system, shoot for 28 - 32 F range for best results.
-
Using a thermoelectric ice chest to make your ice last longer....
There are now loads of coolers on the market designed for summer road trips that typically plug into 12V (car) but often have available AC adapters. These are great if you are using an ice chest ...
-
Can I buy just the trub dam and pickup separate?
No At this time we are not offering this assembly for sale without purchase of a kettle (which comes with this assembly already Kettles biz is too cut throat and we need all the competitive advanta...
-
What is the thickness of your tri-clad bottoms??
They have a 6 mm cross-sectional thickness.
-
Choosing kettle size / mashing, batch size, etc
Here is a reply from Victor at Norcal Brewing (our partner on the false bottoms for our kettles) to a guy who was asking what sized kettle to buy. Hi Sebastian, The vertical position of the thermom...